ALU BAD

ALU BAD
The concentrated special cleaner for aluminum cans and tubes in immersion baths

Effects
AUCO ALU BAD removes drawing fats, pastes and oxide layers from aluminum cans and tubes. Special protective agents create a shiny surface and prevent fossilization of car washes, chains and thorns. Protects seals. Especially economical in consumption if you use AUCO RONDASLIDE as lubricant!

Use
AUCO ALU BAD is used in aqueous immersion cleaning systems and baths for aluminum cans, tubes and parts. Also proven in baths with ultrasound systems.

Application
Dilute AUCO ALU BAD into washing machine. Concentration (depending on object size and cleaning time) – 0,5 to 0,8%. With short contact time up to approx. 1,2%. Prewash zone 0,8 to 1,4%. Bath temperature: 55 to 70° C. For spray systems use AUCO ALU JET!

Ingredients
Alkalines, complexing agents, anionic and nonionic surfactants, helping agents.
Organic ingredients are biodegradable.

GHS 05 - Danger, Corrosive

Gefahrensymbol:

GHS 05 - Danger, Corrossive

UN-No.: 3266

VOC: 0 %

Safety instructions
H314
Causes severe skin and eye burns

P102
Keep out of reach of children

P280
Wear protective gloves / protective clothing / eye protection

P302 + P350
After contact with skin: wash gently with plenty of soap and water

P305 + P351 + P338
If in contact with eyes: rinse gently with water for several minutes. Remove contact lenses, if possible, and continue rinsing.

Do not inhale spray!
Store frost-free!
Share by: