CALK - S

CALK - S
The special descaler and concrete remover

Effect
AUCO CALK - S reliably and gently removes concrete, lime and mineral stone, limescale and other contaminants. Specially developed protective agents (inhibitors) protect steel and iron surfaces, galvanized surfaces, metal parts and non-ferrous metals as much as possible.

Commitment
For decalcifying and cleaning of cooling and heating systems, steam generators and boilers as well as pipelines. For removing concrete deposits on vehicles and equipment. For cleaning car washes, walls and surfaces.

Application
Surfaces, depending on the deposits, pure until 1:10 diluted with water and leave to act. Wash with a high pressure device. When decalcifying closed systems, you must always open the system and ensure pressure equalization. Use at room temperature, do not heat above 60° C. Further information in the technical data sheet.

Ingredients
Inorganic acids, n-surfactants, inhibitors, colouring agents and auxiliaries.
Organic ingredients are biodegradable.
GHS 05 - Danger, Corrosive

Symbol:

GHS 05 - Danger, Corrosive

UN-No.: 1789

VOC:   0 %


Safety instructions

H314
Causes severe skin and eye burns

P102
Keep out of reach of children

P280
Wear protective gloves / protective clothing / eye protection / face protection

P305 + P351 + P338
If in contact with eyes: rinse gently with water for several minutes. Remove contact lenses, if possible, and continue rinsing.

P301 + P330 + P331
if swallowed: rinse mouth. Do not induce vomiting.

Do not inhale spray!
Store frost-free!
Share by: