CALK

CALK
The highly concentrated descaling and cleaning agent

Effect
AUCO CALK reliably and gently removes lime and mineral stone, lime saponification, milk and beer stone, rust, protein and alkaline deposits as well as other soilings. Iron parts are phosphated and non-ferrous metals (copper, brass, aluminum) become lightened.
AUCO CALK contains no hydrochloric acid! Safe for stainless steel, chrome and plastics.

Use
For decalcifying and cleaning cooling and heating systems, steam generators or pipelines. In the food and beverage industry for containers, devices, hoses, beer pipes etc. In the sanitary area for surfaces and fittings.

Application
For surfaces, mix 1:10 to 1:20 with water, lime and mineral stone 1:5 to 1:8. When decalcifying closed systems, you must always open the system and ensure pressure equalization. Use at room temperature, do not heat above 60° C. For pipelines, add 20 to 50ml into 10 liters of water and let it circulate in the pipes. Rinse well with drinking water.

Ingredients
Anorganic acids, n-surfactants, inhibitors, colouring agents and auxiliaries.
Organic ingredients are biodegradable.
GHS 05 - Danger, Corrosive

Symbol:

GHS 05 - Danger, Corrosive

UN-No.: 1805

VOC: 0 %

Safety instructions
H314
Causes severe skin and eye burns

P102
Keep out of reach of children

P280
Wear protective gloves / protective clothing / eye protection / face protection

P305 + P351 + P338
in case of contact with eyes: Rinse cautiously with water for several minutes. Etvl. Remove contact lenses, if possible. Continue rinsing.

P301 + P330 + P331
if swallowed: rinse mouth. Do not induce vomiting.

Do not inhale spray!
Store frost-free!
Share by: